Helmet Holder - Yamaha VIRAGO XV250P Owner's Manual

1. Projection
2. Seat holder
To install the rider seat
1. Insert the projection on the front of
the rider seat into the seat holder
as shown.
2. Place the rider seat in the original
position, and then tighten the
bolts.
NOTE:
@
Make sure that the rider seat is proper-
ly secured before riding.
@
INSTRUMENT AND CONTROL FUNCTIONS

1. Helmet holder

2. Unlock.
Helmet holder
To open the helmet holder, insert the
key into the lock, and then turn the key
as shown.
To lock the helmet holder, place it in
the original position, and then remove
the key.
WARNING
@
Never ride with a helmet attached to
the helmet holder, since the helmet
may hit objects, causing loss of
control and possibly an accident.
@
3-9
EAU00260
EW000030
3