Starting A Warm Engine - Yamaha VIRAGO XV250P Owner's Manual

Hide thumbs Also See for VIRAGO XV250P:
Table of Contents

Advertisement

6. After starting the engine, move the
starter (choke) lever back halfway.
CAUTION:
@
For maximum engine life, always
warm the engine up before starting
off. Never accelerate hard when the
engine is cold!
@
7. When the engine is warm, turn the
starter (choke) off.
NOTE:
@
The engine is warm when it responds
normally to the throttle with the starter
(choke) turned off. To avoid the possi-
bility of excessive exhaust emissions,
never leave the starter (choke) on long-
er than necessary. The time necessary
for starter (choke) use depends upon
the ambient temperature. Tempera-
tures above 10 °C (50 °F) require about
7 seconds of starter (choke) use and
temperatures below 10 °C (50 °F) re-
quire about 35 seconds with the starter
OPERATION AND IMPORTANT RIDING POINTS
(choke) turned on, then about 2.5 min-
utes with the starter (choke) in the half-
way position.
ECA00055
@

Starting a warm engine

Follow the same procedure as for start-
ing a cold engine with the exception
that the starter (choke) is not required
when the engine is warm.
5-3
EAU01258
5

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Virago xv250pc

Table of Contents