Speedometer Unit; Handlebar Switches - Yamaha VIRAGO XV250P Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
3
1. Odometer
2. Tripmeter
3. Reset knob
4. Speedometer

Speedometer unit

The speedometer unit is equipped with
a speedometer, an odometer and a
tripmeter. The speedometer shows
riding speed. The odometer shows the
total distance traveled. The tripmeter
shows the distance traveled since it
was last set to zero with the reset knob.
The tripmeter can be used to estimate
the distance that can be traveled with a
full tank of fuel. This information will en-
able you to plan future fuel stops.
1. Dimmer switch "LIGHTS"
2. Turn signal switch "TURN"
3. Horn switch "HORN"

Handlebar switches

EAU00095
Dimmer switch "LIGHTS"
Set the switch to "HI" for the high beam
and to "LO" for the low beam.
Turn signal switch "TURN"
To signal a right-hand turn, push this
switch to the right. To signal a left-hand
turn, push this switch to the left. When
released, the switch returns to the cen-
ter position. To cancel the turn signal
lights, push the switch in after it has re-
turned to the center position.
Horn switch "HORN"
Press this switch to sound the horn.
EAU00118
EAU00122
EAU00125
3-2
EAU00130