1. Engine stop switch "ENGINE STOP"
2. Start switch "START"
Engine stop switch "ENGINE STOP"
Set this switch to "OFF" to stop the en-
gine in case of an emergency, such as
when the motorcycle overturns or
when the throttle cable is stuck.
Start switch "START"
Push this switch to crank the engine
with the starter.
CAUTION:
@
See page 5-2 for starting instruc-
tions prior to starting the engine.
@
INSTRUMENT AND CONTROL FUNCTIONS
1. Clutch lever
Clutch lever
EAU00137
The clutch lever is located at the left
handlebar grip. To disengage the
clutch, pull the lever toward the handle-
bar grip. To engage the clutch, release
the lever. The lever should be pulled
rapidly and released slowly for smooth
EAU00141
clutch operation.
The clutch lever is equipped with a
clutch switch, which is part of the igni-
tion circuit cut-off system. (See page
EC000005
3-11 for an explanation of the ignition
circuit cut-off system.)
1. Shift pedal
EAU00152
Shift pedal
The shift pedal is located on the left
side of the engine and is used in com-
bination with the clutch lever when
shifting the gears of the 5-speed con-
stant-mesh transmission equipped on
this motorcycle.
3-3
3
EAU00157