2. Slide the seat rearward to fit the
slot in its bottom over the center
seat holder.
3. Push the front of the seat down to
lock it in place.
3
1
2
4
1. Projection
2. Rear seat holder
3. Slot
4. Center seat holder
4. Remove the key.
TIP
Make sure that the seat is properly se-
cured before riding.
Instrument and control functions
Helmet holder
1
1. Helmet holder
The helmet holder is located under the
seat.
To secure a helmet to the helmet
holder
1. Remove the seat. (See page 4-13.)
2. Attach the helmet to the helmet
holder, and then securely install
the seat. WARNING! Never ride
with a helmet attached to the
helmet holder, since the helmet
may hit objects, causing loss of
control and possibly an acci-
dent.
[EWA10162]
4-14
To release the helmet from the hel-
EAU14312
met holder
Remove the seat, remove the helmet
from the helmet holder, and then install
the seat.
4