Table of Contents
Advertisement
DLA for TOSHIBA
Note the following limitations when you use DLA:
I
This software supports only rewritable discs (DVD+RW, DVD-RW, and
CD-RW). It does not support DVD+R, DVD-R, and CD-R discs that are
not rewritable.
I
DLA does not support formatting a DVD-RAM disc and writing to it.
They are performed by DVD-RAM Driver Software. If DLA Format menu
may appear when inserting a DVD-RAM disc into the drive and right-
clicking the drive icon in Windows Explorer, please use "DVDForm" to
format this disc. You can run "DVDForm" by clicking the Start button on
the taskbar to display the Start menu and then selecting "All Programs",
"DVD-RAM", "DVD-RAM Driver" and "DVDForm" sequentially.
I
Do not use any discs that have been formatted with packet writing
software other than DLA. Similarly, do not use any discs that have been
formatted with DLA with any packet writing software other than DLA.
When using a disc you are not familiar with, format it by selecting "Full
Format" before using it.
I
Do not use the Cut & Paste function for files and folders. A file or folder
that has been cut may be lost if writing fails due to an error on the disc.
I
When writing the Setup files for the program to a disc formatted by DLA
and starting Setup from this disc, an error may occur. In this case,
please copy them to your hard disk and then run Setup.
Video
As for InterVideo WinDVD Creator Platinum. Only the model that can be
written to DVD is attached.
When WinDVD Creator Platinum is used
You can record video back to your digital camcorder via i.LINK (IEEE1394)
using WinDVD Creator Platinum. However you may find instances where
the quality of the playback sound is reduced. If this is the case follow the
steps listed below.
1. Click the Windows Start button and select the Control Panel option.
2. Click the Performance and Maintenance icon in the Control Panel.
3. Click the System icon in the Performance and Maintenance window.
4. Click the Advanced tab in the System Properties window.
5. Click the Settings icon in the "Performance" section.
6. Click the Advanced tab in the Performance Options window.
7. Click the Change icon in the "virtual memory" section.
8. Select the Custom size button in the Virtual Memory window.
9. Specify much higher values for "Initial size" and "Maximum size."
10. Click the Set button in the Virtual Memory window.
11. Click the OK button in the Virtual Memory window.
User's Manual
Operating Basics
4-21
Advertisement
Table of Contents
