Dvd-Rom&Cd-R/Rw Drive; Dvd Super Multi Drive - Toshiba Qosmio E10 User Manual

DVD-ROM&CD-R/RW drive
For more information, refer to Chapter 4,
Problem
You cannot access a
CD/DVD in the drive
Some CD/DVDs run
correctly, but others do
not

DVD Super Multi drive

For more information, refer to Chapter 4,
Problem
You cannot access
a CD/DVD in the drive
User's Manual
Operating
Procedure
Make sure the drive's drawer is securely closed.
Press gently until it clicks into place.
Open the drawer and make sure the CD/DVD is
properly seated. It should lie flat with the label
facing up.
A foreign object in the drawer could block laser
light from reading the CD/DVD. Make sure there
is no obstruction. Remove any foreign object.
Check whether the CD/DVD is dirty. If it is, wipe it
with a clean cloth dipped in water or a neutral
cleaner. Refer to the
Chapter 4 for details on cleaning.
The software or hardware configuration may be
causing a problem. Make sure the hardware
configuration matches your software's needs.
Check the CD/DVD's documentation.
Check the type of CD/DVD you are using. The
drive supports:
DVD-ROM: DVD-ROM, DVD-Video
CD-ROM: CD-DA, CD-Text, Photo CD
(single/multi-session), CD-
ROM Mode 1, Mode 2, CD-
ROM XA Mode 2 (Form1,
Form2), Enhanced CD (CD-
EXTRA), Addressing
Method 2
Check the region code on the DVD. It must
match that on the DVD-ROM&CD-R/RW drive.
Region codes are listed in the
drives section in Chapter 2, The Grand Tour.
Operating
Procedure
Make sure the drive's drawer is securely closed.
Press gently until it clicks into place.
Troubleshooting
Basics.
Media care section in
Optical media
Basics.
9-9