Table of Contents
Advertisement
Password
User Password
This option allows you to set or reset the user password for power on.
Not Registered
Registered
To enter a user password:
1. Select Registered to display the following prompt:
S
2. Enter a password of up to 10 characters (You cannot use the following
characters: - ^ @ [ ] ; : , . / space). The character string you enter is
displayed as a string of asterisks. For example, if you enter a password
consisting of four characters, the display is shown as:
S
If you click the OK button before entering the password, Not
registered will appear on the display.
3. Click the OK button. The following message appears, allowing you to
verify the password.
S
4. If character strings match, the password is registered and the display
changes to:
S
If they do not match, the following message appears. You must repeat
from step 1.
S
To delete a user password:
1. Select Not Registered to display the following prompt:
S
2. Enter the currently registered password. The character string you enter
is displayed as a string of asterisks.
S
If you click the OK button before entering the password, Registered will
appear on the display.
User's Manual
Change or remove the password (Default).
Set the password. A dialogue box will appear to
let you set the password.
Enter Password:
Enter Password: ****
Verify Password:
The password was registered
Entry Error!!!
Enter Password:
Enter Password: ****
HW Setup
7-2
Advertisement
Table of Contents
