Right side
The figure below shows the computer's right side.
Volume control
Headphone
(S/PDIF) jack
In the figures below you can see some plug examples for the headphone
jack. Note that these plugs are not bundled to your computer:
Optical digital audio out plug
When you want to connect an optical digital audio-out cable with TOSLINK
plug you can use an adaptor plug as shown in the figure below.
When you connect an optical digital audio-out cable (optional) directly to
your digital stereo receiver port or stereo headphone jack, the internal
speakers of your computer are disabled.
User's Manual
Headphone jack
Microphone jack
Volume control
The right side of the computer
Optical digital audio-out plug with TOSLINK adaptor
Optical media drive
Use this dial to adjust the volume of the stereo
speakers or the stereo headphones.
This jack lets you connect digital speakers or
stereo headphones (16 ohm minimum). When
you connect a digital speaker or headphones, the
internal speaker is automatically disabled.
This jack can be used also as S/PDIF jack and
enables connection of optical digital
correspondence apparatus.
The Grand Tour
USB port
Stereo headphones plug
2-4