Table of Contents
Advertisement
2. The following menu will be displayed with the following icons: Built-in
HDD, CD-ROM, FDD, Network (LAN), PC (ATA) card boot.
A bar will appear only under the selected device.
3. Use the left/right cursor keys to highlight the boot device you want and
press Enter.
Network Boot Protocol
This feature sets the protocol to remotely boot from the network.
Keyboard
Wake-up on Keyboard
When this feature is enabled and the computer is in Standby Mode, you
can turn on the computer by pressing any key. It is effective only for the
internal keyboard and only when the computer is in Standby Mode.
Enabled
Disabled
CPU
This function lets you set the CPU operating mode.
This option is only displayed on those models fitted with a Pentium-M
processor.
Dynamic CPU Frequency Mode
This option lets you choose from the following settings:
Dynamically
Switchable
User's Manual
[PXE] Sets PXE as the protocol (Default).
[RPL] Sets RPL as the protocol.
Enables the Wake-up on Keyboard function
Disables the Wake-up on Keyboard function
(Default).
CPU power consumption and clock speed
automatic switching function is enabled. When
the computer is in use, CPU operation is
automatically switched when necessary
(Default).
HW Setup
7-5
Advertisement
Table of Contents
