Table of Contents
Advertisement
8
9
10
11
12
13
Wireless IEEE 802.11 Channels Sets (11G Turbo Mode)
Frequency Range
Channel ID
6
When installing Wireless LAN cards, the channel configuration is managed
as follows:
I
For wireless clients that operate in a Wireless LAN Infrastructure, the
Wireless LAN card will automatically start operation at the channel
identified by the Wireless LAN Access Point. When roaming between
different access points the station can dynamically switch to another
channel if required.
I
For Wireless LAN cards installed in wireless clients that operating in a
peer-to-peer mode, the card will use the default channel 10.
I
In a Wireless LAN Access Point, the Wireless LAN card will use the
factory-set default channel (printed in bold), unless the LAN
Administrator selected a different channel when configuring the
Wireless LAN Access Point device.
Wireless IEEE 802.11 Channels Sets (Revision A)
Frequency Range Channel
ID
36
40
44
48
User's Manual
2447
2452
1
2457*
2462
2467*
2
2
2472*
5150-5850 MHz
2437
5150-5850 MHz
5180
5200
5220
5240
Wireless LAN
Note
4
US only*
Note
C-3
Advertisement
Table of Contents
