Replacing The Light Bulb - Smeg Oven Instructions For Use Manual

Instructions for the User

14.2 Replacing the light bulb

WARNING: Ensure that the appliance is switched off before replacing the
lamp to avoid the possibility of electric shock.
To replace the light bulb, proceed as follows:
Disconnect the oven from the power supply. Take the plug out
of the socket or switch off the oven's power circuit.
Unscrew and remove the glass light cover (1).
Remove the light bulb (2). Warning! The bulb may be very hot.
Fit a new E14 230-240V/15W bulb. Follow the lamp manufacturer's
instructions. IMPORTANT NOTE: Make sure that the sealing rings (3)
are applied in the correct sequence.
Screw the glass light cover into place (1).
Connect the oven again to the power supply.
EN
34