Removing The Door; Removing The Door Seal - Smeg Oven Instructions For The User

Instructions for the user

11.2 Removing the door

Open the door completely.
Insert a pin into the hole in the hinge. Repeat for both hinges.
Grasp the door on both sides with both hands, lift it forming an angle
of around 30° and remove it.
To reassemble the door, put the hinges in the relevant slots in the
oven, making sure that grooved sections C are resting completely at
the base of the slots. Lower the door and once it is in place remove
the pins from the holes in the hinges.

11.3 Removing the door seal

To permit thorough cleaning of the oven, the door seal may be
removed.
There are fasteners on all four sides to attach it to the edge of the
oven. Pull the edges of the seal outwards to detach the fasteners.
The seal must be replaced when it loses elasticity and hardens.
57