Electronic Programmer - Smeg Oven Instructions For The User

8. ELECTRONIC PROGRAMMER

8.1 Electronic programmer
8.1.1 Setting the time
On the first use, or after a power failure,
and keys together, and at the same time press the value adjustment keys
increase or decrease the setting by one minute for each pressure.
Press either of the value modification keys to display the current time.
Before each programmer setting, activate the required function and temperature.
8.1.2 Semi-automatic cooking
Semi-automatic cooking is the function which allows a cooking operation to be started and then ended
after a specific length of time set by the user.
Press the
same time use the keys
When is released, the count of the programmed cooking duration will start and the display will show
the current time together with
set).
8.1.3 Automatic cooking
This function switches the oven on and off in fully automatic mode.
Press the
same time use the value modification keys
Press the
it pressed, and at the same time use the value modification keys
time.
When is released, the programmed count will start and the display will show the current time
together with the symbols A and
After making the setting, press the
view the cooking end time. The logic prevents the setting of incompatible values (e.g. the programmer
will not accept a cooking end time with a duration which is too long for its value).
46
Instructions for the user
key and the display will light up showing the figures
or to set the cooking duration.
and A (to indicate that a programmed cooking operation has been
key and the display will light up showing the figures
key and the display will show the sum of the current time plus the cooking duration: keep
.
LIST OF FUNCTIONS
Timer key
End of cooking key
Cooking duration key
Value decrease key
Value increase key
will be flashing on the oven's display. Press the
or to set the cooking duration.
key to view the remaining cooking time; press the
or
; keep it pressed, and at the
; keep it pressed, and at the
or to adjust the end of cooking
: this will
key to