Sharp MD-R3 Operation Manual page 36

(Continued)
DISPLAY/CHARACTER NAME/TOC EDIT
4
(To erase the letter "U")
5
The character will disappear.
6
TOC DISC
4
(To add a character to left of the "S")
5
(To add the letter "E")
The original characters will move
to the right by one.
6
TOC DISC
To erase a character
DELETE/CLEAR
After performing steps 1 to 3 on page 34, do the following to
TIMER
erase unwanted characters:
ENTER
Example: To change "BESUT" to "BEST"
3 2
4
Press the /
erase begin flashing.
5
Press the DELETE/CLEAR button.
6
Press the NAME/TOC EDIT button.
To add a character
After performing steps 1 to 3 on page 34, do the following to
add additional characters:
Example: To change "BST" to "BEST"
3 2
4
Press the /
at the place you want to add a letter.
5
Select the character you want to add, using the jog dial. Then,
press the ENTER button.
6
Press the NAME/TOC EDIT button.
To correct a spelling
After putting the unit in the character input mode, erase the wrong
character. Then, enter the correct character.
35
MD-R3
button to make the character you want to
button to make the character begin flashing