Sharp MD-R3 Operation Manual page 31

(Continued)
ENTER
NAME/TOC EDIT
1
TRACK
REMAIN
(To erase the sixth track)
2
TRACK
REMAIN
3
4
TOC TRACK
REMAIN
1
TRACK
TOTAL
2
TOTAL
3
4
TOC DISC
TOTAL
ERASE
To erase tracks one at a time:
1
While in the stop mode, select the track to be erased using
the jog dial.
Or start playing the track which you want to erase, and press 06
the MD
The unit will enter the pause mode.
2
Press the NAME/TOC EDIT button, and then select "ERASE"
using the jog dial.
3
Within 10 seconds, press the ENTER button.
1 2 3 4 5 6 7
To cancel the operation, press the MD
8 9 10 11 12 13 14
15 16 17 18
4
Press the ENTER button again.
The track is erased, and the unit is paused at the beginning
of the previous track.
1 2 3 4 5 6 7
Notes:
8 9 10 11 12 13 14
15 16 17 18
Once a track has been erased, it cannot be recovered. Dou-
ble-check the track number before erasing it.
When a track is erased, the numbers assigned to the tracks
following the erased track will be automatically decreased by
one.
When a track is erased, the track name will be erased at the
same time.
1 2 3 4 5 6 7
8 9 10 11 12 13 14
15 16 17
To erase all of the tracks at once:
1
Press the MD
The total number of tracks and the total playing time for the
1 2 3 4 5 6 7
MD will be displayed.
8 9 10 11 12 13 14
15 16 17 18
2
Press the NAME/TOC EDIT button, and then select "ALL
ERASE" using the jog dial.
3
Within 10 seconds, press the ENTER button.
1 2 3 4 5 6 7
To cancel the operation, press the MD
8 9 10 11 12 13 14
15 16 17 18
4
Press the ENTER button again.
All of the track numbers and track names will be erased.
Note:
This function cannot be used while in the program ("PRGM"
is lit: Page 15) or random play mode ("RANDOM" is lit: Page
14). First, cancel the program or random play mode before
trying to use this function.
30
MD-R3
button.
button.
button.
button.