Sharp MD-R3 Operation Manual page 16

(Continued)
PROGRAM DELETE/CLEAR
TIMER
1
5
9
MD PROGRAM
CLEAR
CD MD
CD
2
PRGM
"PRGM" indicator
4
TOTAL
PRGM
6
TOTAL
PRGM
Total playing
time
7
PRGM
"PRGM" will disappear.
PRGM
The playing time will appear
about 2 seconds later.
APMS
(Automatic Programmable Music Selector)
1
Select the desired program source, CD or MD, by pressing
the CD
2
Press the PROGRAM button while in the stop mode.
Programs cannot be set or canceled while in the playback or
pause mode.
2 3 4
3
If you have selected CD, press one of the buttons (
6 7 8
- 3) to select the disc to be played.
10/0 10
4
Select a desired track number by pressing the DIRECT KEY
button on the remote control.
If the total program playing time exceeds 199 minutes and
59 seconds, "— : —" will appear. However, the programmed
selections will still be memorized.
5
Repeat steps 3 and 4 for any other tracks. Up to 20 MD
tracks or 32 CD tracks can be programmed.
To select a track on an MD or on the same CD, skip step 3.
The programmed playback order and the total playing time of
the programmed tracks will be displayed automatically, and
only those track numbers will appear in the music schedule.
6
Press the CD
7
Press the CD
programmed selections.
2
After all of the programmed tracks have finished playing, the
unit will automatically stop.
To clear the programmed selections:
Press the DELETE/CLEAR (CLEAR) button while the "PRGM"
indicator is flashing.
Each time the button is pressed, one track will be cleared,
2 3 6
8 9
beginning with the last track programmed.
To cancel the APMS:
Selected track
number While the unit is stopped in the APMS mode, press the CLEAR
button on the remote control to turn off "PRGM".
When you use the DELETE/CLEAR button on the main unit, all
of the programmed contents will be erased by holding it down
for at least 2 seconds. (If you simply press this button briefly, the
unit will enter the timer mode.)
2 3 6
8 9
The program contents will be erased.
When you open the disc tray or a MiniDisc is removed, the
APMS mode will be canceled.
To check which tracks are programmed:
While the unit is stopped in the APMS mode, turn the jog dial.
Or press the
1 2 3 4 5 6 7
8 9 10 11 12 13 14
When the jog dial is turned clockwise, the next track number
15 16 17 18 19 20
will appear. When it is turned counterclockwise, the previous
track number will appear.
To add tracks to the APMS:
When a program has been entered ("PRGM" will be lit), perform
steps 2 - 6. Additional tracks can be selected and they will be
stored after the last track you entered.
2 3 6
8 9
Notes:
It is not possible to insert an additional track between pro-
grammed tracks that have already been entered.
Programming and canceling are not possible during playback
or in the pause mode.
15
MD-R3
or MD button.
or MD button.
06 06
or MD button to start playback of the
5 4
or button on the remote control.
1