Sharp MD-R3 Operation Manual page 30

(Continued)
ENTER
NAME/TOC EDIT
1
TRACK
REMAIN
15 16 17 18
(To move the eighth track)
2
REMAIN
15 16 17 18
3
(To move to the fifth track)
4
TOC TRACK
REMAIN
15 16 17 18
1
TOTAL 1
PRGM
2
1
TOTAL
PRGM
3
4
TOC TRACK
1 2 3 4 5 6 7
8 9 10 11 12 13
REMAIN
15 16 17 18
MOVE
1
While in the stop mode, select the track you want to move
using the jog dial.
Or start playing the track to be moved, and then press the 06
MD
The unit will enter the pause mode.
2
Press the NAME/TOC EDIT button, and then select "MOVE"
using the jog dial.
3
Within 10 seconds, press the ENTER button.
To cancel the operation, press the MD
4
1 2 3 4 5 6 7
Select the direction to move the track using the jog dial or 5 4
8 9 10 11 12 13 14
the /
To increase the track number ....
To decrease the track number ....
5
Press the ENTER button again.
1 2 3 4 5 6 7
8 9 10 11 12 13 14
The track is moved, and the unit is stopped at the beginning
of the track.
Notes:
When a track has been moved, the other tracks which are
affected will be assigned new track numbers automatically.
Example: When moving the fifth track to the third track, the old
third track will become the new fourth track, and the
old fourth track will become the new fifth track.
This function cannot be used while in the program ("PRGM"
is lit: Page 15) or random play mode ("RANDOM" is lit: Page
14). First, cancel the program or random play mode before
trying to use this function.
1 2 3 4 5 6 7
8 9 10 11 12 13 14
Programmed move
3 5 7 1
9 11 14 Select the tracks you want to move and enter them into a
18
program. (Page 15)
2
Make sure that the "PRGM" indicator is lit, and then press
the NAME/TOC EDIT button.
"PRGM MOVE" will appear.
3 5 7
9 11 14
18
3
Within 10 seconds, press the ENTER button.
To cancel the operation, press the MD
4
Press the ENTER button again.
The tracks will be moved, and the programmed move mode
will end.
Notes:
14
The tracks that are not included in the programmed selections
will be put at the end of the new track numbers.
When the same track has been entered into the program twice
or more, the last programmed position will have priority.
29
MD-R3
button.
button.
button on the remote control.
4
5
button.