Sharp MD-R3 Operation Manual page 13

(Continued)
1 2 3
POWER
CD DIRECT PLAY
POWER
When choosing a CD for playback
EJECT
Press one of the CD DIRECT PLAY 1 - 3 (
select the CD you want to listen to.
Only the selected CD will be played back.
When selecting
disc tray 1
Notes:
If any disc tray is open, it will be automatically closed.
If the CD
0 6
performed from the first track of disc 1, even after disc 2 or
disc 3 has been selected.
1 2 3
Direct playback:
If a CD is loaded in the unit, pressing the CD
any of the CD DIRECT PLAY 1 - 3 (
power on and begins playback.
Cautions:
Do not carry the unit while CDs are in the trays or a
MiniDisc is loaded. The discs may come loose inside the
unit and be damaged or cause damage to the unit. This
may also cause malfunctions.
Do not place two CDs in one disc position.
Do not push the disc trays while they are moving.
Do not attempt to push the disc tray by hand. This may
cause malfunctions.
If the power fails while a tray is open, wait until the power
supply returns or gently push the tray manually to close it.
If the disc tray is stopped forcibly, "TRAY ERROR" will
appear in the display and the unit will not function.
If this occurs, turn off the POWER button and turn it on
again.
If TV or radio interference occurs during CD operation,
move the unit away from the TV or radio.
If a disc is damaged, dirty, or loaded upside down, the disc
will be skipped and the next disc will automatically play.
Do not use CDs with tape or loose labels on them, or CDs
which have a sticky surface left by tape or labels that have
peeled off. If such a CD is inserted, you may not be able
to remove the CD or the unit may malfunction.
If the CD
0 6
3 ( 1 - 3) buttons or the
disc tray is open, the disc tray will be automatically closed.
Be careful not to catch your finger.
12
MD-R3
1 - 3) buttons to
When selecting
When selecting
disc tray 2
disc tray 3
button is pressed, continuous playback will be
0 6
1 - 3) buttons turns the
button, any of the CD DIRECT PLAY 1 -
button is pressed when a
7
button or