Using The Machine As A Shared Printer - Sharp AR-5516S Start Manual

USING THE MACHINE AS A SHARED PRINTER

If the machine will be used as a shared printer on a Windows network, follow these steps to install the printer driver
in the client computer.
To configure the appropriate settings in the print server, see the operation manual or help file of your operating
Note
system.
1
Perform steps 2 through 6 in
"INSTALLING THE SOFTWARE
(AR-5516S/AR-5520S/AR-5516/AR-5520/
AR-5516D/AR-5520D)" (p.8).
2
Click the "Custom" button.
3
Click the "MFP Driver" button.
Click the "Display Readme" button to show
information on packages that are selected.
For AR-5516S/AR-5520S
Click the "Printer Driver" button.
Click the "Display Readme" button to show
information on packages that are selected.
4
Select "Connected via the network"
and click the "Next" button.
5
Select the printer name (configured as
a shared printer on a print server)
from the list.
In Windows 2000/XP, you can also click the "Add
Network Port" button displayed below the list and
select the printer to be shared by browsing the
network in the window that appears.
6
Click the "Next" button.
Follow the on-screen instructions.
If the shared printer does not appear in the
Note
list, check the settings on the print server.
• If you are using Windows Vista and a
Caution
security warning window appears, be sure
to click "Install this driver software anyway".
• If you are running Windows 2000/XP and a
warning message appears regarding the
Windows logo test or digital signature, be
sure to click "Continue Anyway" or "Yes".
7
You will return to the window of step 3.
Click the "Close" button.
After the installation, a message prompting
Note you to restart your computer may appear. In
this case, click the "Yes" button to restart your
computer.
This completes the installation of the software.
SETUP
11