Sharp AR-5516S Start Manual page 18

SETUP
If the machine will be used as a shared printer
on a network, select "Shared Printer" and
click the "Next" button.
• For the port to be used, select the printer name set as
a shared printer, and click the "Next" button.
• In Windows 2000/XP, you can also click the "Add
Network Port" button and select the printer to be
shared (the machine) by browsing the network in the
window that appears.
If the shared printer does not appear in the
Note
list, check the settings in the printer server.
• If you are using Windows Vista and a
security warning window appears, be sure
Caution
to click "Install this driver software anyway".
• If you are running Windows 2000/XP and a
warning message appears regarding the
Windows logo test or digital signature, be
sure to click "Continue Anyway" or "Yes".
Follow the on-screen instructions and go to step
8.
5
The printer or printers connected to
the network will be detected. Click the
printer to be configured (the machine)
and click the "Next" button.
If the machine's IP address cannot be found,
make sure the machine is powered on, make
Note
sure the network cable is connected correctly,
and then click the "Search" button.
16
6
In the window for setting the
destination print port name, make
sure that ":lp" appears at the end of
the IP address and click the "Next"
button.
Any name can be entered in "Printer Port
Note
Name" (maximum of 63 characters).
7
A window appears to let you check
your entries. Make sure that the
entries are correct and then click the
"Finish" button.
If any of the entries are incorrect, click the "Back"
button to return to the appropriate window and
correct the entry.