Installing The Software (Ar-5516N/Ar-5520N); Set The Ip Address - Sharp AR-5516S Start Manual

SETUP
INSTALLING THE SOFTWARE
(AR-5516N/AR-5520N)
• The screen images in this manual are mainly for Windows Vista. With other versions of Windows, some screen
Note
images may be different from those in this manual.
• If an error message appears, follow the instructions on the screen to solve the problem. After the problem is
solved, the installation procedure will continue. Depending on the problem, you may have to click the "Cancel"
button to exit the installer. In this case, reinstall the software from the beginning after solving the problem.

Set the IP Address

1
Insert the LAN cable into the LAN
connector on the machine.
Use a network cable that is shielded.
2
Insert the CD-ROM into your CD-ROM
drive.
3
Click the "Start" button, click
"Computer", and then double-click the
CD-ROM icon (
• In Windows XP, click the "start" button, click
"My Computer", and then double-click the
CD-ROM icon.
• In Windows 2000, double-click "My Computer",
and then double-click the CD-ROM icon.
4
Double-click the "Setup" icon (
In Windows Vista, if a message screen appears
asking you for confirmation, click "Allow".
5
The "SOFTWARE LICENSE" window
will appear. Make sure that you
understand the contents of the
software license, and then click the
"Yes" button.
You can show the "SOFTWARE LICENSE" in
Note
a different language by selecting the desired
language from the language menu. To install
the software in the selected language,
continue the installation with that language
selected.
12
).
)
.
6
Read the message in the "Welcome"
window and then click the "Next"
button.
7
Click the "Set the IP Address" button.
8
When the software selection screen
appears, click the "Set the IP
Address" button.