Connecting To A Computer (Ar-5516S/Ar-5520S/Ar-5516/Ar-5520/Ar-5516D/ Ar-5520D); Connecting A Usb Cable - Sharp AR-5516S Start Manual

Digital multifunctional system
Hide thumbs Also See for AR-5516S:
Table of Contents

Advertisement

SETUP
CONNECTING TO A COMPUTER
(AR-5516S/AR-5520S/AR-5516/AR-5520/AR-5516D/AR-5520D)
Follow the procedure below to connect the machine to your computer.
A USB cable for connecting the machine to your computer is not included with the machine. Please purchase the
appropriate cable for your computer.
Interface cable
USB cable
Shielded twisted pair cable, high-speed transmission equivalent (3 m max.)
If the machine will be connected using a USB 2.0 interface, please purchase a USB cable that supports USB 2.0.
• USB is available with a PC/AT compatible computer that was originally equipped with USB and had Windows
Caution
2000 Professional, Windows XP Professional, Windows XP Home Edition or Windows Vista preinstalled.
• Do not connect the USB cable before installing the Printer/MFP driver. The USB cable should be connected
during installation of the Printer/MFP driver.

CONNECTING A USB CABLE

1
Insert the cable into the USB connector on
the machine.
System requirements for USB 2.0 (Hi-Speed mode)
• The machine's USB 2.0 connector will transfer data at the speed specified by the USB 2.0 (Hi-Speed) only if the
Microsoft USB 2.0 driver is preinstalled in the computer, or if the USB 2.0 driver for Windows 2000
Professional/XP/Vista that Microsoft provides through its "Windows Update" Web page is installed.
• Even when the Microsoft USB 2.0 driver is used, it may not be possible to obtain full USB 2.0 speed if a PC card
supporting USB 2.0 is used. To obtain the latest driver (which may enable a higher speed), contact the
manufacturer of your PC card.
• Connection is also possible using a USB 1.1 port on your computer. However, the specifications will be USB 1.1
specifications (Full-Speed).
• If your computer is not compatible with USB 2.0 (Hi-Speed), the "USB 2.0 mode switching" setting in the
machine's system setting must be set to "Full-Speed". For more information, see "SYSTEM SETTINGS" in the
Operation Guide.
10
2
Insert the other end of the cable into
your computer's USB connector.
3
4
5
6
7
8
9
10
11
12
13
14

Advertisement

Table of Contents
loading

Table of Contents