Planet XRT-401E User Manual page 2

Internet broadband router
Hide thumbs Also See for XRT-401E:
Table of Contents

Advertisement

Copyright
Copyright (C) 2008 PLANET Technology Corp. All rights reserved.
The products and programs described in this User's Manual are licensed products of
PLANET Technology, This User's Manual contains proprietary information protected by
copyright, and this User's Manual and all accompanying hardware, software, and
documentation are copyrighted. No part of this User's Manual may be copied, photocopied,
reproduced, translated, or reduced to any electronic medium or machine-readable form by
any means by electronic or mechanical. Including photocopying, recording, or information
storage and retrieval systems, for any purpose other than the purchaser's personal use,
and without the prior express written permission of PLANET Technology.
Disclaimer
PLANET Technology does not warrant that the hardware will work properly in all
environments and applications, and makes no warranty and representation, either implied
or expressed, with respect to the quality, performance, merchantability, or fitness for a
particular purpose PLANET has made every effort to ensure that this User's Manual is
accurate; PLANET disclaims liability for any inaccuracies or omissions that may have
occurred.Information in this User's Manual is subject to change without notice and does not
represent a commitment on the part of PLANET. PLANET assumes no responsibility for
any inaccuracies that may be contained in this User's Manual. PLANET makes no
commitment to update or keep current the information in this User's Manual, and reserves
the right to make improvements to this User's Manual and/or to the products described in
this User's Manual, at any time without notice.If you find information in this manual that is
incorrect, misleading, or incomplete, we would appreciate your comments and suggestions.
FCC Compliance Statement
This equipment generates and uses radio frequency energy and if not installed and used
properly, that is, in strict accordance with the instructions provided with the equipment, may
cause interference to radio and TV communication. The equipment has been tested and
found to comply with the limits for a Class A computing device in accordance with the
specifications in Subpart B of Part 15 of FCC rules, which are designed to provide
reasonable protection against such interference in a residential installation. However, there
is no guarantee that interference will not occur in a particular installation. If you suspect this
equipment is causing interference, turn your Ethernet Switch on and off while your radio or
TV is showing interference, if the interference disappears when you turn your Ethernet
Switch off and reappears when you turn it back on, there is interference being caused by
the Ethernet Switch. You can try to correct the interference by one or more of the following
measures:
1. Reorient the receiving radio or TV antenna where this may be done safely.
2. To the extent possible, relocate the radio, TV or other receiver away from the Switch.
3. Plug the Ethernet Switch into a different power outlet so that the Switch and the receiver
are on different branch circuits.
2

Advertisement

Table of Contents
loading

Table of Contents