Table of Contents
Advertisement
Parameter
2.1 Cable Modem
2.2 Fixed-IP xDSL
2.3 Dial-Up xDSL
(PPPoE)
2.4 PPTP
2.5 L2TP
Click on one of the WAN types and then proceed to the manual's relevant sub-section (2.1,
2.2, 2.3, 2.4 or 2.5). Click on Back to return to the previous screen.
2.1 Cable Modem
Choose Cable Modem if your ISP will automatically give you an IP address. Some ISP's
may also require that you fill in additional information such as MAC address (see screen
below).
The MAC address section is optional and you can skip this section if
Note
your ISP does not require these settings for you to connect to the
Internet.
Your ISP will automatically give you an IP address.
Your ISP has given you an IP address already
Your ISP requires you to use a Point-to-Point Protocol over
Ethernet (PPPoE) connection.
Your ISP requires you to use a Point-to-Point Tunneling
Protocol (PPTP) connection.
Layer 2 Tunneling Protocol is a common connection method
used in xDSL connections.
15
Description
Advertisement
Table of Contents
