Table of Contents
Advertisement
Parameter
Destination LAN IP
Subnet Mask
Gateway
Metric
Interface
3.6.2 Static Routing
This page is used to configure the routing information. Here you can add / delete IP routes.
Parameter
Destination LAN IP, Subnet
Mask
Description
The IP address where packets will go to.
The subnet mask of the destination IP address.
The gateway that the packets will pass by during
transmission.
Metric represents the "cost" of transmission for routing
purposes. IP Routing uses hop count as the
measurement of cost.
The interface that the packets pass through on the
device.
Description
Specify the destination LAN IP where the packets will
be routing to packets will be routing to.
50
Advertisement
Table of Contents
