PLANET Technology Corp.
admin# setup wan 3 list
WAN Interface Parameters
Int.
Link
IP Address/
---- -------- ----------------------------- --------- ------ --- ----
WAN 1 Disable
WAN 2 Disable
WAN 3 Ethernet
192.168.3.1/ 255.255.255.0
WAN 4 Disable
WAN 5 Disable
WAN 6 Disable
WAN 7 Disable
WAN 8 Disable
To save the new WAN port configuration, enter:
admin# write
3.12.4 WAN IP address
Note: This sub-section is for routing mode operation with protocol of "Ethernet" and/or "IPoA" only. For PPP
connections, it is unnecessary to set the WAN port IP address and subnet mask.
To set the WAN 3 with IP address of 192.168.3.3 and subnet mask of
255.255.255.0, follow the following example:
admin# setup wan 3 address 192.168.3.3 255.255.255.0
To review the new configuration you have configured, type:
admin# setup wan 3 list
WAN Interface Parameters
Int.
Link
IP Address/
---- -------- ----------------------------- --------- ------ --- ----
WAN 1 Disable
WAN 2 Disable
WAN 3 Ethernet
192.168.3.3/ 255.255.255.0
WAN 4 Disable
WAN 5 Disable
GRT-101/401/402 User's Manual
Netmask VPI/ VCI Encap. QoS PCR
0/ 135 VC-Mux CBR 512
Netmask VPI/ VCI Encap. QoS PCR
0/ 135 VC-Mux CBR 512
- -
58