username "admin" and password " admin" and then click "OK" to enter the system.
Default User Name: admin
Default Password: admin
3.2 Access NVR with its default IP address
The NVR comes with a pre-confi
However, it is only used when there
network. Connect the NVR and PC to your
directly to the NVR using a crossover CAT5 Ethernet cable.
The PC that is connected directly to the NVR (or within the same local area network)
should receive an IP from it. Simply a ccess the NVR from y our web browser with
NVR default IP address.
You should be prompted for the user name and password. Enter its default username
"admin" and password " admin" and then click" OK" to enter the system.
gured static IP a ddress "192.168.0.20".
is no DHCP serv er presented in the
switch or hub , or connect the PC