Access Nvr With Its Default Ip Address - Planet NVR-810 User Manual

3.2 Access NVR with its default IP address

The NVR comes with a pre-configured static IP address "192.168.0.100".
However, it is only used when there is no DHCP server presented in the
network. Connect the NVR and PC to your switch or hub, or connect the PC
directly to the NVR using a crossover CAT5 Ethernet cable.
The PC that is connected directly to the NVR (or within the same local area
network) should receive an IP from it. Simply access the NVR from your web
browser with NVR default IP address.
You should be prompted for the user name and password. Enter its default
username "admin" and password "admin" and then click" OK" to enter the
system.