Config Tool - Planet GRT-101 User Manual

PLANET Technology Corp.
Time Protocol (NTP) used to synchronize computer clocks in the Internet.
SNTP can be used when the ultimate performance of the full NTP
implementation.
For SNTP, select SNTP v4.0.
SNTP service: Enable
Time Server: All of the time server around the world can be used but suggest
to use the time server nearby.
Time Zone: you have to choose the right time zone.
Press Finish to finish the setup. The browser will prompt the configured
parameters and check it before writing into GRT-101/GRT-401/GRT-402.

Config Tool

This configuration tool has three functions: load Factory Default, Restore
Configuration and Backup Configuration.
Press Config Tool.
Choose the function and then press finish.
Ø
Load Factory Default function: it will load the factory default parameters to
the gateway.
Note: If this function is chosen, and activated. All of the settings in
GRT-101/GRT-401/GRT-402 will be restored to factory default configurations.
Ø
Restore Configuration: Sometime the configuration will be crushed
unintentionally. Restore configuration will help you to recover the backup
configuration easily.
² Click Finish after selecting Restore Configuration.
² Browse the route of backup file then press finish.
GRT-101/GRT-401/GRT-402 will automatically restore the saved
configuration.
Ø
Backup Configuration: After
configuration, suggest to use
the function to backup your
router parameters in the PC.
² Select the Backup
Configuration and then press
Finish.
Browse the place of backup file named backup. Press Finish.
GRT-101/GRT-401/GRT-402 will automatically backup the configuration.
GRT-101/401/402 User's Manual
- - 28