Access Nvr With Its Default Ip Address - Planet NVR-420 User Manual

3.2 Access NVR with its default IP address

The NVR comes with a pre-confi gured static IP a ddress "192.168.0.20".
However, it is only used when there is no DHCP serv er presented in the
network. Connect the NVR and PC to your switch or hub , or connect the PC
directly to the NVR using a crossover CAT.5 Ethernet cable.
The PC that is connected direc tly to the NVR (or within the s ame local area
network) should receiv e an IP from it. Simply access the NVR from your web
browser with NVR default IP address.
You should be prompted for the user name and password. Enter its default
username "admin" and password " admin" and then click" OK" to enter the
system.
20