Repeater Support; Restoring The Base Station To The Factory Settings - Siemens Gigaset E490 User Manual

Repeater support

With a repeater you can increase the range
and reception strength of your base station.
You will need to activate repeater mode. This
will terminate any calls that are in progress at
the time.
Precondition: A repeater is registered. The
Eco Mode / Eco Mode + is deactivated.
¢ ¢ ¢
v Ð
Base
¢
Repeater Mode
§Yes§
Press the display key.
When repeater mode is active, the menu
item is marked with
Please note
Repeater support and Eco Mode/Eco
¢
Mode + ( page 44) cancel each other
out, i.e. both functions cannot be used at
the same time.
Restoring the base station to
the factory settings
When the settings are restored:
u
handsets are still registered
u
the system PIN is not reset
¢ ¢ ¢
v Ð
Base
~
Enter the system PIN and
§OK§
press
§Yes§
Press the display key.
Cancel the restoring process by pressing
a or the display key
a
Press and hold (idle status).
Add. Features
‰
.
Base Reset
.
§No§
.
Base station settings
55