Activating/Deactivating Music On Hold; Activating Repeater Support; Protecting Against Unauthorised Access; Resetting The Base To The Default Settings - Siemens SL400 User Manual

•
Activating/deactivating
music on hold
Ï
¢ ¢
v
Audio Settings
¢
Music on Hold
§Change§
Press to activate or deactivate the
music on hold (³ = on).
•
Activating repeater
support
With a repeater, you can increase the range
and signal strength of your base. You will
need to activate repeater mode. This will ter-
minate any calls that are in progress at the
time.
Prerequisite: A repeater is registered.
Ï
¢ ¢
v
System
§Change§
Press to activate/deactivate repeater
mode (³ = activated).
Switch your handset off and on again
¢
( page 22), once the repeater has
been activated/deactivated.
Please note
u
Eco Mode / Eco Mode+ (
and repeater support cancel each
other out, i.e., if you use a repeater,
you cannot use Eco Mode or Eco
Mode+.
u
The default encrypted transmission
setting is deactivated when a
repeater is activated.
•
Protecting against
unauthorised access
Protect the base system settings with a PIN
known only to you. The system PIN must be
entered when, for example, registering/
deregistering a handset to/from the base or
when restoring the default settings.
¢
Repeater Mode
¢
page 54)
Changing the system PIN
You can change the 4-digit system PIN set on
the base (default setting: 0000) to a 4-digit
PIN known only to you.
Gigaset SL400A: Setting a system PIN facili-
tates remote operation of the answering
¢
machine ( page 51).
Ï
¢ ¢
v
System
~
Enter the current system PIN
and press
~
Enter your new system PIN and
§OK§
press
Resetting the system PIN
If you have forgotten your system PIN, you
can reset the base to the original code 0000:
Disconnect the power cable from the base.
Hold down the registration/paging key on
the base while reconnecting the power
cable to the base. Hold down the key for at
least 5 seconds.
The base has now been reset and the system
PIN is set to 0000.
Please note
All handsets are deregistered and must
be re-registered. All settings are reset to
the default settings.
•
Resetting the base to the
default settings
When the settings are restored:
u
Date and time are retained
u
Handsets are still registered
u
Eco Mode is activated and Eco Mode+ is
deactivated,
u
The system PIN is not reset.
Ï
¢ ¢
v
System
~
Enter the system PIN and
§OK§
press
§Yes§
Press the display key.
¢
System PIN
§OK§
.
.
¢
Base Reset
.
71