Handset Settings; Quick Access To Functions - Siemens Gigaset E490 User Manual

Handset settings

Changing a set external
destination number
¢ ¢
v í
Room Monitor
s
Scroll to the Call to line.
§Edit§
Press the display key.
X
Delete existing number.
¤
Enter number as described in "Activating
the room monitor and entering the desti-
¢
nation number" (
¤
§Save§
Press to save the settings.
Changing a set internal destination
number
¢ ¢
v í
Room Monitor
s
Scroll to the Call to line.
§Delete§
Press the display key.
§Edit§
Press the display key.
¤
Enter number as described in "Activating
the room monitor and entering the desti-
¢
nation number" (
¤
§Save§
Press to save the settings.
Deactivating the room monitor
remotely
Preconditions: The phone must support
tone dialling and the room monitor should
be set for an external destination number.
¤
Accept the call from the room monitor
and press keys 9 ;.
The room monitor function will deactivate
after the call ends. There will be no further
room monitor calls. The other room monitor
settings (e.g. no ringer) on the handset will
remain activated until you press the display
§OFF§
key on the handset.
To reactivate the room function with the
same phone number:
¤
Turn on the activation again and save
¢
§Save§
with ( page 49).
50
page 49).
page 49).
Handset settings
Your handset is preconfigured, but you can
change the settings to suit your individual
requirements.

Quick access to functions

The display keys have a function preset by
default. You can change the assignment.
To start the function, you then simply need
to press the button.
Changing display key assignments
¤
Press and hold the left or right side of the
display key.
The list of possible key assignments is
opened. The following can be selected:
INT
¢
Internal calls ( page 46).
SMS
Assign menu for SMS functions to a key
¢
( page 29).
SMS Notific.
Assign menu for activating SMS notifica-
¢
tion to a key ( page 33).
If a function or number has already been
assigned to the left display key, the selected
function (or its abbreviation) will be dis-
played in the lowest display line above the
display key.
Starting a function
With the handset in idle status, press the dis-
play key briefly.
The function menu is opened.