Setting The Alarm Clock; Using Several Handsets; Registering Handsets - Siemens Gigaset E490 User Manual

Setting the alarm clock

Precondition: The date and time have
¢
already been set (
Activating/deactivating the alarm
clock and setting the wake-up time
¢
v ì
¤
Change multiple line input:
Activation
Select On or Off.
Time
Enter the wake-up time in 4-digit format.
Melody:
Select melody.
Volume:
Set the volume (1–6).
¤
Save the changes.
You will see the ì icon.
A wake-up call with selected ringer melody
¢
( page 52) is signalled on the handset.
The wake-up call sounds for 60 seconds. ì is
shown in the display. If no key is pressed, the
wake-up call is repeated twice at five minute
intervals and then turned off.
During a call, the wake-up call is only sig-
nalled by a short tone.
Deactivating the wake-up call/
repeating after a pause (snooze
mode)
Precondition: A wake-up call is sounding.
§OFF§
Press the display key. The wake-
up call is deactivated.
or
§Snooze§
Press the display key or any key.
The wake-up call is deactivated
and then repeated after 5 min-
utes. After the second repetition
the wake-up call is deactivated
completely.
page 12).
Setting the alarm clock

Using several handsets

Registering handsets

You can register up to six handsets to your
base station.
Manual registration of
Gigaset E49H to Gigaset E490/
E495
You must activate manual registration of the
handset on both the handset (1) and the
base station (2).
Once it has been registered, the handset
returns to idle status. The handset's internal
number is shown in the display e.g. INT 1. If
not, repeat the procedure.
1) On the handset
¢ ¢
v Ð
Handset
~
Enter the system PIN of the
base station (the default is
0000) and press
flashes in the display.
2) On the base station
Within 60 seconds press and hold the regis-
tration/paging key on the base station
(page 1) (approx. 3 seconds).
Registering other handsets
You can register other Gigaset handsets and
handsets for other devices with GAP func-
tionality as follows.
1) On the handset
Start to register the handset as described in
its user guide.
2) On the base station
Press and hold the registration/paging key
on the base station (page 1) (approx. 3 sec.).
¢
Register H/Set
§OK§
. Base 1
45