Siemens Gigaset E490 User Manual page 12

First steps
¤
Insert the rubber headset socket
cover provided to guarantee the unit
is splashproof.
If you need to reopen the battery cover, for instance to change the batteries, please
proceed as follows:
¤
Turn the lock ring or belt clip anti-
clockwise to the end stop
(approx. 20°) and remove.
Position your thumb and index
finger on both sides of the lock
ring.
¤
Insert a suitable tool (e.g. a small
coin) into the cavity at the top of
the battery cover and twist it until
the cover opens.
Placing the handset in the charging cradle
¤
Insert the mains adapter of the charging cradle into the mains socket.
¤
Place the handset in the charging cradle with its display facing forward.
The handset is registered with the base station at the factory. You do not need to
complete a registration. If you wish to use your handset with a different base station
or use further handsets with your base station, you will have to register the handset
manually
To charge the battery, leave the handset in the charging cradle.
Please note
Only place the handset in the charging cradle that is intended for it.
10
¢
page 45.