Table of Contents
Advertisement
You cannot deactivate the confirmation
tone for placing the handset in the base
station.
Please note:
You can also set the call volume, the ringer
tones and the advisory tones via the menu.
Setting the alarm clock
Precondition: The date and time have
already been set (page 8).
Activating/deactivating the alarm
clock and setting the wake-up time
¢
v
ì
¤
Change multiple line input:
Activation:
Select
On
or Off.
Time:
Enter the wake-up time in 4-digit for-
mat.
Melody:
Select melody.
Volume:
Set the volume (1–6).
¤
Save changes: (page 25).
You will see the ì icon.
A wake-up call with selected ringer tone
(page 19) is signalled on the handset. The
wake-up call sounds for 60 seconds. ì is
shown in the display. If no key is pressed,
the wake-up call is repeated twice at five
minute intervals and then turned off.
During a call, the wake-up call is signalled
by a short tone.
Deactivating the wake-up call/
repeating after a pause (snooze mode)
Precondition: A wake-up call is sounding.
Press the display key. The
§OFF§
wake-up call is deactivated.
Or
Press the display key or any
§Snooze§
key. The wake-up call is deacti-
vated and then repeated after
5 minutes. After the second
repetition the wake-up call is
deactivated completely.
Restoring the handset to the
factory settings
You can reset any individual settings and
changes that you have made. This will not
affect entries in the directory, call history,
or the handset's registration to the base
station.
¢
¢
v
Ð
Handset
Press the display key.
§Yes§
a
Press and hold (idle status).
Setting the handset
¢
Reset Handset
21
Advertisement
Table of Contents
