Convection Roast Mode And Probe Operation - Thermador CM301 Care And Use Manual

Built-in combination ovens
Table of Contents

Advertisement

Oven Operations

Convection Roast Mode and Probe Operation

Use the oven meat probe to take the guesswork out of roasting meats. The meat probe allows you to prepare
perfectly roasted meats and poultry by roasting to a specific internal temperature. It is easy to roast meats to an exact
temperature for medium rare, medium, medium well or well done. Refer to the Convection Roast Recommendations
for "end" temperatures for different meats and poultry.
Results will yield a drier, crisper exterior that seals in
the interior juices with few pan drippings.
Use Convection Roast when roasting tender cuts of
meat or poultry.
Roast in a low-sided, uncovered pan. Place meat on
a flat or V-shaped roasting rack.
To set the Convection Roast and Probe mode:
1. Prepare meat and insert the probe into the thickest
section. Avoid bone, gristle and fat.
2. For double ovens, select upper or lower
oven.
Message scrolls in display.
3. Place roasting pan on oven rack and push the
plug into the oven probe receptacle.
4. Select CONVECTION ROAST.
The temperature is automatically set
at 325°F.
To change the oven temperature:
To change the temperature from 325ºF, use
the number pads to select another
temperature .
Message scrolls in display.
5. Select PROBE
To change the Probe temperature from
160ºF (71ºC), use the number pads to
select another temperature.
Message scrolls in display.
6. Select START.
The temperature display alternates between the
set Probe temperature and the actual meat/
poultry temperature, increasing in 5ºF increments
starting with 100ºF.
Touch CONVECTION ROAST to view the set oven
temperature. The display returns to the probe
temperature after 5 seconds of inactivity.
(Upper or Single Oven only)
Do not reduce recommended roasting temperature.
Insert tip of probe into the center of thickest section,
avoiding bone and fat.
Do not cover meat or use cooking bags.
The probe temperature range is 100°F - 200°F. The
default temperature is 160°F.
Touch
UPPER
OVEN
Upper (Lower) Oven Selected - Touch Mode
Touch
CONVECTION
ROAST
Touch
3 5 0
Touch
PROBE
Touch
1 4 5
Touch
START
39
Built-in CM Oven Care and Use Manual
You Will See
UPPER
UPPER
o
350
UPPER
Select Convection Temperature
then touch PROBE
o
1 4 5
UPPER
PREHEAT
Select Probe Temperature
then touch START
o
o
100
/145
UPPER
Convect Roast
2: 57
2: 57
2: 57
2: 57

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cm302

Table of Contents