Setting The Clock; Setting The Lights - Thermador CM301 Care And Use Manual

Oven Operations
To Cancel an Active Timer:
Select TIMER 1 OFF or TIMER 2 OFF.
To Set Both TIMER 1 and TIMER 2:
• Follow the steps above to set each Timer. The Timer with the least amount of countdown time has display
priority. The countdown display for the second timer is shown automatically when the first timer has ended.
• The words "TIMER 1" and "TIMER 2" are both displayed along with the number countdown.
• The designation, "TIMER 1" or "TIMER 2" with the least remaining countdown time is more brightly lit than the
other word.
• During the countdown, touch CLOCK or TIMER. Depending on the pad touched, either the time of day or the
remaining time is briefly displayed.
To Change a Timer:
1. Touch TIMER 1 or TIMER 2.
2. Enter the new desired time.
3. Touch the START pad.
• Always set the clock after installation or after a power
failure. Once power returns to the oven, the clock
displays the time of day when power was turned off
or lost.
• The Time of Day clock can be set while an automatic
timed cooking mode is in operation.
• If 10 seconds elapse between touching the clock pad
or number pads, the oven will beep two times as a
reminder.
• After 5 more seconds, the clock pad will stop flashing
and original time will be displayed.
• Touch OVEN LIGHT pad once to turn light on or off.
• The lights do not operate in the Self Clean mode.
Setting the Timer
(Continued from previous page)

Setting the Clock

To Set the Clock:
1. Touch the CLOCK pad.
Message scrolls in display:
2. Set the current time of day.
Message scrolls in display:
3. Touch START or CLOCK.

Setting the Lights

10
Built-in CM Oven Care and Use Manual
Enter Time of Day then touch START
Enter Time of Day then touch START