Viewer Setup; Print - Samsung SNC-L200 User Manual

6.5.2 Viewer Setup

1. Image Recording
- Location (Video Recording Folder): Designates the path to save the recorded
video file
Default : {install drive}:\Program Files\Network Camera MultiViewer
- Schedule
Sets Day and Time to saved the video of the selected channel.
When you set the Day only, videos will be saved 24 hours for the day. When you
set the Time only, videos will be saved for the designated time everyday.
In addition, if you set both Time and Day, videos will be saved at the designated
time on the day only.
58
Video Netcam | SNC-L200
Netcam MultiViewer
2. Image Capturing
- Frame Rate: It designates numbers of videos that are saved when you run the Capture
function once.
You may set to 1~3.
3. Sequence Time
- Use this to set the time a video switches. You may set to 5~30 seconds.
- If Single is checked, it switches to one server in sequence when you run the Sequence
function.
4. Logo Image File
- It designates the folder path where the Logo file of File Folder Viewer is located.
Default: {install drive}:\Program Files\Network Camera MultiViewer\Samsung_Logo.bmp
5. Cancel
Use this when not to apply the changed settings.
6. Close
Use this to apply the changed settings and exit Viewer Setup Mode.

6.6 Print

Use this when you want to print a still video from live videos.
To run the Print function, you must install and set the Printer in Print Setup that is at the
top or Print.
1) Select the video you want to print from the screen window where videos are displayed.
2) Press "Print" icon ( ). The following screen appears.
Video Netcam | SNC-L200
Netcam MultiViewer
59