Content Checklist - Samsung SNC-L200 User Manual

Hide thumbs Also See for SNC-L200:
Table of Contents

Advertisement

Netcam Specifications
Image Compression
Video Streaming Format
Resolution
Server
Frame Rate
Authentication
Upgrade
Remote Pan Angle
Remote Tilt Angle
Maximum Pan/Tilt Speed
Camera
Image Sensor
Focus
Flash LED
PIR Sensor
Network Connection
Network Service
Interface
Network Protocol
Power Adaptor
Power
Power Consumption
Operating Temperature
Dimension(W*H*D)
Weight
You may download the latest version of Netcam SNC-L200 User Manual from Samsung
Electronics home page at www.sec.co.kr. The Multi Channel View Guide is in the CD
shipped with Netcam.
* Depending on the network environment or PC function, decrease in image transfer speed
may occur.
* PIR Sensor detects temperature changes caused by the infrared ray that naturally emitted
from human or animal. Therefore, a detection error or narrowing down of detection range
may occur due to the effect caused by ambient temperature change and use of A/C or
heater.
Video Netcam | SNC-L200
Product Overview
JPEG
MJPEG
640*480 / 320*240 / 160*120
320*240 : Max. 30Fps
640*480 : Max. 15Fps
ID/Password
Ethernet connection
50° left/right max.
40° to +10°
50°/sec
1/4" 320,000 Pixel CMOS
Fixed 1m-infinity
Range : 3m, Lux Value(1m) : 8.0 lux
Range : 3m, Left/Right 30°, Up/Down 85°
Ethernet 10/100Base-T
Fixed IP, Cable Modem, ADSL, DHCP, IP Router
TCP/IP, UDP, DHCP, ARP, HTTP, Telnet, PPPoE,
SMTP, FTP
8.4V DC, 1A
5W (8.4V DC, 500mA)
0°C to +40°C Indoor Only
105mm*75mm*48mm
400g
6

1.2 Content Checklist

Netcam and accessories are safely packed in the box. After purchasing the product,
make sure you have all the following contents.
!
@
%
^
! Netcam
: 1 EA
@ User Manual
: 1 EA
# CD
: 1 EA
$ Accessory Pouch
: 1 EA
I
Anchor-wall 16 x 3
: 2 EA
I
Screw KAL-Black
: 2 EA
% Power Adaptor
: 1 EA
^ Power Cable
: 1 EA
& CORE-FERRITE
: 1 EA
Check carefully and make sure there are no missing or damaged components.
If any component is missing or damaged, contact the retailer where you purchased the product.
* SNC-L200 can affect EMI(Electro-Magnetic Interface),
so it is recommended to coil the CORE-FERRITE for use.
It is recommended to wind the LAN cable three times before use.
(The CORE-FERRITE is contained in SNC-L200 box).
Video Netcam | SNC-L200
Product Overview
$
#
&
CORE-FERRITE
CABLE
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Netcam snc-l200

Table of Contents