Motion - Samsung SNC-L200 User Manual

3) Click "Memo" to enter the description to be recorded in the print and click OK.
The description will be recorded and printed in the Memo field at the bottom of the print.
You may enter up to 63 characters in a row.
4) Click "Setup" to select the printer.
5) Press "Print" icon ( ). Printer starts printing while the transmission
complete message appears.
"Transmission failed" message appears when the printer is not set. You need to set
the printer
60
Video Netcam | SNC-L200
Netcam MultiViewer

6.7 Motion

It is a function to Alarm Recording when a motion is detected on Netcam videos.
1. Enable Motion Detection
Click it to turn the Motion Detection function on.
Click it to turn the Motion Detection function off.
2. Sensitivity
Use it to set the sensitivity of the Motion.
Set the sensitivity in numbers. Enter numbers between 1~10. (10: Most sensitive)
3. Motion Area
The area marked with thick green on the screen is where Motion Detection occurs.
It is divided into 16, and you may click the area you want to set repeatedly to run the
Setup/Remove function.
4. Area that does no Motion
It is an area that does not Motion Detection.
5. Pretest
Sets the sensitivity temporarily.
Video Netcam | SNC-L200
Netcam MultiViewer
61