Table of Contents
Advertisement
5.1.1 System Information
Configure Netcam name.
The name can be a combination of numbers and letter up to 20
Server Name
characters. However, characters such as #, ', ", : cannot be used.
Displays "NETWORK CAMERA."
Model
However, only reading is available. Writing is prohibited.
Shows System and Web program version of Netcam.
Version
However, only reading is available. Writing is prohibited.
5.1.2 Admin. Password
Administrator's ID
Administrator's ID is always "root."
Old Password
Password at initialization is "root."
Enter the password you want to change. Password can be a
New Password
combination of numbers and letters up to 4~20 characters.
Confirm Password
Enter the password you want to change one more time.
Video Netcam | SNC-L200
Smart Viewer Administration Menu
32
5.1.3 Access Configuration
Any one can view images by connecting to Smart Viewer
without going through the authentication process.
Full Access
You cannot control Camera's basic operations when it is
connected in Full Access.
When a regular user tries to connect to Smart Viewer, he/she
Limited Access
will be connected through the authentication process.
You may configure frame per second for image transfer as
1fps/2fps/5fps/10fps/15fps/30fps/.
Maximum Frame
When the image size is 640*480: Max. 15fps
Rate
When the image size is below 320*240: Max. 30fps
5.1.4 User Registration
Add
This is the menu to register users.
Enter new user ID.
User ID
Password
Enter new user password.
Confirm Password
Enter new user password one more time.
Full Name
Enter new user name.
* You cannot control Camera's basic operations when you logged in as a user ID other
than the Administrator.
Video Netcam | SNC-L200
Smart Viewer Administration Menu
33
Advertisement
Table of Contents
