Product And Accessory Checklist - Samsung SNC-L200 User Manual

1.3 Product and Accessory Checklist

Front
!
! Camera Lens
Displays images entered from camera lens through the Viewer.
Pan/Tilt control can be done through the Viewer.
@ PIR Sensor
The built-in PIR sensor detects object movements and outputs signals.
# Network LED
Indicates Network link status. LED lights up when a proper network
cable is connected to Netcam.
I
ON: Network link complete
I
Blinking : Receiving/Transmitting data
$ Flash
Connected with PIR sensor.
It flashes for 5 seconds automatically when there is a movement.
Flash On/Off control can be done through the Viewer.
% Privacy
Button for the Privacy protection.
When the button is pressed first time, the lens moved to outside of the
operation range, so the screen is displayed in black. Press the button
again to cancel the video transfer from the Netcam. Pressing the button
yet again will return to initial status and the normal control will become
available.
^ Power LED
Indicates Power supply status.
Video Netcam | SNC-L200
Product Overview
#
$
%
@ ^
8
Back
! DC Power Adaptor Please connect a DC 8.4V/1A.
@ LAN
Please connect a network cable (LAN cable).
# PRESET
Set the Netcam setup value to the factory default status.
Press for more than 3 seconds during a normal operation (about
1 minute after power is on), Netcam setup value will change to
the factory default settings. Due to rebooting, it will operate after
1 minute
The existing setup values, such as IP, Administrator log on information, and upgrade
information will be changed to the factory default status. Please reset all the
Caution
information to operate SNC-L200.
Please use authorized DC power adapters only. Using unauthorized devices may
damage the product.
Caution
Video Netcam | SNC-L200
Product Overview
! @ #
9