Table of Contents
Advertisement
4. When the search for Netcam in the same router is over, the following message
appears on the screen. Click "OK."
5. Select the Netcam you want from the screen where the search is complete.
Right click "Edit."
6. "Network Option" screen appear.
* Before Staring Network Configuration
If you connect Netcam using IP router, IP and Port
cannot be automatically allocated. You must enter
the numbers yourself using the IP router
configuration program.
For the correct configuration steps, please refer to
IP Router User's Manual.
Refer to "3.1.1 IP Router Configuration" for details.
Video Netcam | SNC-L200
Netcam Configuration
18
Click "Static."
IP Type
I
When Netcam is connected to IP router, it is considered
having a static IP internally.
Enter Netcam's name. The name can be a combination of
Server Name
numbers and letters up to 20 characters. However,
characters such as #, ', ", : cannot be used.
Enter the allocated IP address of Netcam that has been entered in
IP Address
the Port Forwarding configuration during IP router configuration.
Netmask
Enter the Subnet mask of IP router.
Network
Default Gateway
Enter the Default Gateway of IP router.
Use default value for DNS server whenever possible.
DNS1/DNS2
I
Default value is 168.126.63.1/168.126.63.2.
Enter the Port number of Netcam that has been entered in the
HTTP Port
Port Forwarding configuration during IP router configuration.
Enter the Netcam Administrator Password.
Authentication Key
Save All Configuration
Save
Save Only Network
Configuration
Configuration
Option
Not Saving
Click "Set" button to apply the configuration to Netcam and save according to the "Save
Configuration Option." During IP configuration, you cannot connect to Netcam. Please
close Internet Explore window, wait for 1 minute, and then connect to it again.
Click "Cancel" button to cancel the configuration values.
7. Click "Set" button. The following window appears.
Click "Yes."
8. The following screen appears for several seconds.
Video Netcam | SNC-L200
Netcam Configuration
Select it to save all configuration values.
Select if to save network configuration values only.
Select it to configure only but not saving to
the internal Flash Memory.
19
Advertisement
Table of Contents
