Table of Contents
Advertisement
6.4 Using MultiViewer
* You need to click
to register the Netcam to be displayed in Setup first. (Refer to
6.5 "Setup.")
1.
Connect & Netcam list
IP address of the Netcam or the Domain Name list that are registered to the setup
property appears. Select the Netcam IP address to display from the list box and then
click the "Connect" icon to display the video from the selected Netcam.
Image of the Netcam will be displayed.
If you want to display several images, repeat the step described above.
* One image per one channel will be displayed consecutively.
2.
Date & Time
Displays the date (dd/mm/yyyy) and current time.
3.
1Ch
Displays the image of selected channel.
When you press the button first time, the image displayed is the size setup in the
Netcam (640*480/320*240/160*120).
If you click the button again, the image will be displayed in full screen.
Video Netcam | SNC-L200
Netcam MultiViewer
52
4.
4Ch
Displays 4 screens with the selected image included.
When all 16 channels are connected, they will be divided into 4 pages each and then
displayed.
If one of the 1-4 channel images is been selected, the first page will be displayed. If one
of the 5-8 channel images is been selected, the second page will be displayed. Similarly,
the third or fourth page will be displayed.
5.
9Ch
Displays 9 screens with the selected image included.
When all 16 channels are connected, they will be divided into 2 pages each and then
displayed. However, the second page will display 7 images.
If one of the 1-9 channel images is selected, the first page will be displayed. If one of the
10-16 channel images is selected, the second page will be displayed. The second page
will display images of 7 Channels only.
6.
16Ch
16 screens will be displayed.
This is a mode to see entire images because all images of 16 Channels will be displayed.
7.
Full
This is a mode that displays only menu icon or images without the Viewer frame
regardless the actual image size. This mode is used to view images only.
If you want to exit from this mode, you may do so by pressing the "Esc" key on the
keyboard of your PC, and return to the menu icon or the original 1, 4, 9, 16 screens with
the Viewer frame.
8.
Sequence
Images connected to the Viewer will be switching consecutively and displayed.
- 1 Screen: Registered images switch consecutively 1 Channel at a time.
- 4 Screen: 4 images are allocated to 1 page, and then switch to 4 pages consecutively.
- 9 Screen: 9 images become 1 page, and the remaining 7 images becomes 2 pages, and
then switch consecutively.
- 16 Screen: No consecutive switching occurs.
If "Viewer Setup ➔ Sequence time ➔ Single" is clicked, the registered images switch
consecutively 1 channel at a time.
If you want to stop the consecutive switching, you may do so by pressing the 1, 4, 9, 16
Screen Display icons.
9.
SNC Installer
It runs SNC Installer.
53
Video Netcam | SNC-L200
Netcam MultiViewer
Advertisement
Table of Contents
