Key Operator Code Number (P19); Registering The Key Operator Code Number - Sharp SF-2540 Operation Manual

KEY OPERATOR PROGRAMS

KEY OPERATOR CODE NUMBER (P19)

A key operator code number must be registered before a key operator
program can be used. The key operator must remember this number. Only
this registered number will allow access to the key operator programs.
AUDIT CLEAR
0
C
INTERRUPT
1
2
4 5
8
7
AUDIT CLEAR
0 C
ISPLAY
MATION
1
2
4 5
7 8
AUDIT CLEAR
0 C
START
9
78

Registering the key operator code number

Press the clear (
1
the clear key again.
The following message will appear.
ENTER KEY OPERATOR CODE.
Enter your key operator code number using the 10-key
2
3
pad.
When registering the key operator code number for the first
6
time, enter the number that was set at the factory. (See page
99.)
S
As the code number is entered, the dashes in the message will
9
change to asterisks.
When the entry is complete, a "P" will appear in the copy
quantity display and the following message will appear.
INPUT A PROGRAM NUMBER AND PRESS
THE START KEY.
Enter the number 19 using the 10-key pad and press
3
the START key.
The following message will appear.
P19: KEY OPERATOR CODE NUMBER CHANGE.
INPUT A NEW CODE AND PRESS THE START
KEY.
4
Choose a new 5-digit code number and enter it using
3
the 10-key pad.
6
S
9
5
Press the START key.
The code number will change from the factory setting to the
new setting.
"P" will appear in the copy quantity display.
6 To continue with other key operator programs, enter
the appropriate program code number.
To exit the key operator program mode, press the
CLEAR ALL key.
) key, the INTERRUPT key, and
–––––
/ / / / /
00000 –––––