Display - Pioneer VSA-AX10I-S Operating Instructions Manual

Display

All the display information is explained and/or referenced here.
1 2 3 4
SIGNAL L C R
AUTO
L S R
S S
RF
LFE
OVER ATT
DIGITAL
3
SP AB
ANALOG
TAPE 2
E O N
RDS RF ATT
8 7
1 SIGNAL SELECT indicators
Light to indicate the input signal you selected.
ANALOG : Lights when an analog signal is
selected.
: Lights when the amplifier is set to select an
i.LINK component.
DIGITAL : Lights when a digital signal is selected.
2RF : Lights when an 2 RF signal is selected.
AUTO : Lights when the amplifier is set to select
the input signal automatically.
2 Program Format indicators
For Dolby Digital, MPEG or DTS sources :
These indicators change according to which
channels are active in the source. When all
three LS (left surround), S (surround) and RS
(right surround) light at the same time it means
a source with a 6.1ch playback flag is being
used.
L – Left front channel.
C – Center channel.
R – Right front channel.
LS – Left surround channel.
S – Surround channel (mono).
RS – Right surround channel.
LFE – Low frequency effects channel.
3
((( ))) – Lights when LFE signal is input.
4 Analog level indicators
OVER – This lights if the signal is in danger of
distorting for analog source signals. Press
INPUT ATT on the front panel to lower the
signal level.
ATT – Lights when INPUT ATT is used to
reduce the level of the analog source signal.
5 Character display
Shows current mode, status, etc.
Displays & Controls
5
6 Digital format indicators
: Lights when a Dolby Digital
DIGITAL
signal is detected.
: Lights when a DTS signal is detected.
: Lights when an MPEG signal is
MPEG
detected.
: Lights when the HOME THX mode is
selected.
: Lights during Surround EX matrix process-
ing.
: Lights when a decoding DTS-ES audio.
: Lights during DTS-ES discrete process-
DISC
ing.
: Lights during DTS-ES matrix process-
MTRX
ing.
: Lights during Dolby Pro Logic II
PRO LOGIC
processing.
: Lights during Neo: 6 processing.
Neo :6
: Lights during two-channel
2ch
PLAYBACK
playback.
7 Speaker indicators
Light to indicate the current speaker system, A
and/or B.
8 TAPE 2 indicator
Lights when the TAPE 2 monitor is on.
6
DIGITAL
DISC MTRX
PRO LOGIC
Neo :6 MPEG
2ch
PLAYBACK
39
En