Table of Contents
Advertisement
1.Select the desired ITS play mode (repeat
mode). (See page 1-7.)
2.Hold down button © in bank [11] for
more than 2 seconds. {"ITS.P" appears
on the display [30].) To cancel ITS play,
hold down button © in bank {11] for more
than 2 seconds again. ("ITS.P" disap-
pears.)
Hf you try to play a track that is not pro-
grammed within the play range of the se-
lected repeat mode by ITS, "EMPTY" will
appear on the display [30] for about 3 sec-
onds, indicating that ITS play is not possi-
ble.
You can perform scan play or random
play during ITS play. In this case, scan
play or random play applies to all the
tracks stored in memory. (If the play
mode is the magazine repaet mode or ail
repeat mode, scan play applies to all the
tracks of the discs in the magazine stored
in memory.)
During ITS play, multi-play CD players
containing discs with programmed tracks
are switched, and disc and track number
search is performed on programmed
tracks. So, you cannot switch to any
tracks or discs that are not stored in
memory.
Entering Titles
1.Select the disc for which you want to en-
ter a title.
2.Hold down button @ in bank [11] for
more than 2 seconds to select title input
mode.
3.Press the (<4) or (P) side of button [1] to
select the input position. The input posi-
tion moves continuously when you hold
down either side of the button.
4.Select characters using the (+) or (-) side
of button [1]. When you hold down either
side of the button, the character changes
continuously. Each press of the (+) side
changes the character from "A-~- B—
C...", while each press of the (-) side
changes the character from "C ~ B + A".
To enter a space, press the space sign
{_).
5.Enter all characters by repeating steps 3
and 4.
Press button @ in bank [11] to store them
in memory.
The title will appear on the display.
* To modify an input title, carry out steps 1
to 5 above again.
Erasing the ITS Program
You can erase one or all selections of the
program for the disc being played by ITS.
To erase a single selection:
1.Start ITS play. (See page 1-8.)
2.Play the track you wish to erase by using
disc number search or track number
search.
3.Hold down button © in bank [11] for
more than 2 seconds. ("CLEAR appears
on the display [30] for about 3 seconds.)
To erase the disc program:
1.Start normal play.
2.Play the disc you wish to erase by using
disc number search.
3.Hoid down button © in bank [11] for
more than 2 seconds to erase the pro-
gram. ("CLEAR" appears on the display
[30] for about 3 seconds.)
Pausing
1.Press button @ in bank [11] to pause dur-
ing disc playback ("PAUSE" appears on
display [30)}.
2.Press button @ in bank [11] again to re-
lease pause.
"© You can select a track using the track
number search during pause. ("PAUSE"
is off while a track is being searched.)
When the track search ends, the found
track is paused at its betinning.
Disc Title List
You can list all discs loaded in the maga-
zine being played. This function is conve-
nient for checking discs in the magazine
being played.
Each press of button @ in bank [11] dis-
plays the tities of the discs in magazine
being played in ascending order of disc
number.
The disc title is displayed for about 8 sec-
onds, then the normal operation display
returns.
¢ Nothing is displayed for discs having no
titles.
* Trays with no discs are skipped.
Select the disc to be played from the disc
1.Press button @ in bank [11] to display the
disc titie.
2.When the title of the disc you want to lis-
ten to is displayed, press button @ in
bank [11]. That disc is played.
Disc Title input
You can enter a title for the disc in the
muiti-play CD player. The titie stored for the
disc can be displayed.
* The ADPS function* of the multi-play CD
player lets you enter titles for up to 100
discs. (Up to 100 discs, including ITS, can
be programmed (see page 1-8).)
*ADPS: Automatic Disc Program Selection
* Adisc title can consist of up 5 characters
for a single disc.
* When the number of discs exceeds 100,
discs not being played (information not
being renewed) in memory is overwritten
by the newest.
* One title is stored for each disc. The title
stored for a disc is not erased after the
disc is changed.
Display Switching
Press button @ in bank [11], to display the
disc title. Press the button again, tobring
the normal display back.
When you press button [6} while the disc
title is being displayed, the normal opera-
tion display will appear for 8 seconis..
PR
IS
I
Fe
EL
DE
TT
TIE TT EEE
EE
TE
TE
Advertisement
Table of Contents
