I.link Related Messages - Pioneer VSA-AX10I-S Operating Instructions Manual

Techno Tidbits & Problem-solving

i.LINK Related Messages

You may see the following messages displayed in the front panel display when using the i.LINK interface.
BUS FULL
The i.LINK bus has reached its capacity and can-
not transmit any more data.
CANNOT LINK 1
The interface between the amplifier and the se-
lected i.LINK-equipped component is unstable. If
the i.LINK cables appear to be connected prop-
erly and both the amplifier and i.LINK-equipped
component are on, switch the amplifier and the
component off and on again to reestablish the
interface between them.
CANNOT LINK 2
The amplifier can't identify the selected i.LINK-
equipped component. For example, the amplifier
may not be able to identify an i.LINK-equipped
personal computer.
LINK CHECK
The amplifier is checking the i.LINK network. It
does this, for example, when components are
added or removed from the network. The sound
may be interrupted if this happens during play-
back.
LOOP CONNECT
The i.LINK network cannot function because it is
connected in a loop. Break the loop (see p.31).
NO NAME
NO NAME is displayed instead of an i.LINK-
equipped component name. The component has
no name.
NO SIGNAL
A component is outputting an i.LINK signal that
the amplifier that cannot reproduce. This amplifier
can reproduce signals from i.LINK-Audio-
equipped components (see p.30-31).
104
En
PQLS OFF
Displayed when PQLS turns off during playback.
The sound may be interrupted momentarily when
this happens.
PQLS ON
Displayed when PQLS turns on during playback.
The sound may be interrupted momentarily when
this happens.
UNKNOWN
UNKNOWN is displayed instead of an i.LINK-
equipped component name. The name of the
component isn't recognized.
This product complies with the following i.LINK
interface specifications:
1) IEEE Std 1394a-2000, Standard for a High
Performance Serial Bus
2) Audio and Music Data Transmission Protocol
2.0
Following the standard for AM824 sequence
adaptation layers, the product is compatible
with IEC60958 bitstream, DVD-A and SACD
media.